WIN-J · EVERYDAY & WORK TOOLS

Wallpaper roll calculator

Estimate wallpaper rolls from full-height strips, trimming allowances and straight pattern repeats. Review wall details, proposed roll cuts, spare rolls and optional material cost.

Free · no installationYour inputs are processed in this browser.

Input settings

Wall and roll units are separate. Trimming and pattern repeat are always cm. Changing a unit reinterprets the number; it does not convert the field.

Walls to cover

Enter complete wall widths, including openings. Full-height strips may still be required around doors and windows, so their area is not deducted. Half-drop, offset, A/B and mural matching are unsupported.

How to use

  1. Choose wall and roll units and enter the roll dimensions.
  2. Choose the pattern match, repeat and trimming allowances.
  3. Add each wall's full width and height and choose spare rolls.
  4. Calculate, review each roll's cuts and copy or export the estimate.

Example

A 4.2 × 2.4 m wall with 0.53 × 10.05 m rolls, 5 cm trims at each end and a 32 cm straight repeat needs 8 cuts of 2.56 m. The plan uses 3 rolls; 1 spare gives 4 purchase rolls.

Method and limitations

Wall strip count = ceil(wall width ÷ roll width). Cut length = height + top trim + bottom trim; straight matching rounds up to a whole pattern repeat, while plain matching ignores repeat. Longest cuts are placed in the fitting roll with the least remaining space; otherwise a new roll is opened. This heuristic does not guarantee the minimum roll count. All usable roll starts are assumed to have the same pattern phase; allow for actual initial motif position separately. Opening offcut reuse, half-drop, offset, A/B, defects and batch colour differences are excluded. Limits: 1–50 walls, 2,000 strips; wall width 100 m, height 20 m; roll width 10 m, length 1,000 m.

Frequently asked questions

Why are windows and doors not deducted?

A full-height strip may still be needed around an opening. Review the complete-width estimate against the actual installation layout.

Does this support half-drop patterns?

Only plain/free and straight match are supported. Alternating offsets require a different cutting plan.

Can all unused length be reused?

It is a sum of separate roll remainders. Check individual offcut lengths and add the spare rolls you need.

Related tools

References